Hustler SLX in stock NOW!

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

We feed around bales per year and would not be without the Hustler. Feeding that used to take an hour and a half can now be done in ten minutes and my back is spared now that I have no graping to do! Previously we were putting out more bales to save having to grape as much which meant that some of the bale was being lost whereas we now have no wastage.

Toughest chain and floor bars on the market, is bullet-proof and lasts the entire life span of the feeder. Super strong roller chains with the combined strength of 24,lbs, with tough 40mm x 40mm zinc-plated bars. Bars are bolted to the chain, a stronger and more easily replaceable system. Tough new Thermoform fully enclosed polyethylene floor with covered drive shafts which eliminate wrapping. Fully enclosed — no wastage of expensive feed. Do you operate in barns, outdoors, on steep country, with a telehandler, supplement with loose silage or fodder beet?

With the flexible configuration of the SLX round bale feeder, your new feeder will suit all of the above. No other feeder allows this level of flexibility which gives you peace of mind, should you want to change the way you operate. Floor bars are times stronger torsionally than angle type bars of the same size. The headstock design allows for optional loader mounts to be bolted direct to the frame, allowing the feeder to be operated on a loader or telehandler.

This provides hay and fuel savings when using the SLX round bale unroller for feeding into bunks, TMR mixers, and hay rings. Add an extra fence to the options and you can feed loose silage or maize loaded with the bucket on your front loader and connect-n-feed from either end of the cradle. The bolt on lower hitch mounts allows for the feeder to be off-set by mm in either direction, another unique feature that allows operators to distribute the feed closer to the head-bails and stock in barns eliminating double handling of the feed saving your time.

The off-set feature works for both 3 point linkage and most loader mounts. Toughest chain on the market. Zinc plated chains rated to 24,lbs with the larger diameter rollers and pins make our chain drive system almost twice as strong as our competitors. The new single piece fully enclosed floor reduces feed waste and will never corrode.

Our ultra-low cradle design with removable fences makes for easy loading should you not have much lift height on your tractors hitch, and lets you customise the feeder to your preferences. The longer spears also make loading easier, by reducing sag. High mounted connection latches on both sides of the feeder take the load off the cradle, which removes any load from the bale spears. This provides a more reliable, positive connection to handle the heavier bales it has been tested to handle.

This also allows operators to switch the direction the bale is being unrolled without unloading the bale, which makes feeding tighter bales on both sides of the passage in single access barns much quicker and easier. Bearings outlast bushes, require less grease and self-align to the shafts. These 3 reasons are why farmers prefer our double sealed heavy duty 4-bolt bearings with trash shields over the bushes.

The 6 tooth sprockets are made from Bisalloy the same material used in a bulldozer blade so they last forever. With smaller diameter sprockets less torque is required to drive the chains, giving more drive power for tough bales. Designed so it is impossible for the chain to jump off the sprockets, this saves you downtime in the field.

Fully enclosed front and rear bale reduces feed falling out whilst travelling and an optional fence can be added to each end, should you want to feed loose silage or fodder beet. The bale is held securely in the chamber on the steepest of terrain. One tine is longer than the other for quick and easy alignment when reconnecting the cradle.

Enables the SLX to feed bales out to the left or right and gives precise control of the feed rate. The SLX can be connected from either end, which allows you to swap sides should you have a tight bale and want to feed on a particular side of your barn.

Hustler, based in New Zealand, has been designing and building farm equipment since They combine a love for machines with creativity, an understanding of farming, and a passion for discovering better ways to do everyday tasks.

Hustler desire to develop products that meet the evolving needs of agriculture. Industry-leading technology ensures meticulous manufacturing standards. All new Hustler products undergo a grueling test programme, giving Hustler the confidence to stand over their products with a two year warranty. Office: Call for price. Customer Testimonial We feed around bales per year and would not be without the Hustler. Print Email. Description The all new SLX is easier to use than any other type chain feeder on the market today.

Heavy duty build quality Toughest chain and floor bars on the market, is bullet-proof and lasts the entire life span of the feeder. Enclosed polyethylene floor Tough new Thermoform fully enclosed polyethylene floor with covered drive shafts which eliminate wrapping. Flexible design Do you operate in barns, outdoors, on steep country, with a telehandler, supplement with loose silage or fodder beet? Back to: Hustler. Contact Office : Henry : James : This email address is being protected from spambots.

You need JavaScript enabled to view it. Opening Hours Mon-Fri: 8. Cookie Policy Sitemap.

 
 

 

360x bale feeder free

 

Recommended for farms feeding bales each year, the self-loading 3-point linkage mounted feeder is suitable for feeding out all but the 360x bale feeder free of round bales and baled silage, loose silage, maize, fodder-beet and more…. Floor bars are times stronger dree 360x bale feeder free angle type bars of the same size. The headstock design allows for optional loader mounts to be bolted direct to the frame, allowing the feeder to be operated on a feedee or telehandler.

This provides hay and fuel savings when using the SLX round bale unroller for feeding into bunks, TMR mixers, and hay rings. Add an extra fence to the options and you can feed loose silage, maize, fodder beet, etc, loaded with the bucket on your front loader and connect-n-feed from either end of the cradle.

360x bale feeder free bolt on lower hitch mounts allows for the feeder to be off-set by mm in either direction, another unique feature that allows operators to distribute the feed closer to the head-bails and stock in barns eliminating double handling of the feed saving your time. The off-set feature works for both 3 point linkage and most loader mounts.

Toughest chain on the market. Zinc plated chains rated fdeder 24,lbs with the larger diameter rollers and pins make our chain drive system almost twice as strong as our competitors. The new single piece fully enclosed floor reduces feed waste and will never corrode. Our 360x bale feeder free cradle design with removable fences makes for easy loading should you not have much lift height shareit free download for windows 10 free your tractors hitch, and lets you customise the feeder to your preferences.

The longer spears also make loading easier, by reducing sag. High mounted connection latches on both sides of the 360x bale feeder free take the load off the cradle, which removes any load from the bale spears. This provides a more reliable, positive connection to handle the heavier bales it has been tested to handle.

This also allows operators to switch the direction the bale is being unrolled without unloading the bale, which makes feeding tighter bales on both sides of the 360x bale feeder free in single access barns 360x bale feeder free quicker and easier. Bearings outlast bushes, require less grease and self-align 360x bale feeder free the shafts. These 3 reasons are why farmers prefer our double sealed heavy duty 4-bolt bearings with trash shields over the bushes.

Our 6 tooth sprockets are made from Bisalloy the same material used in a bulldozer blade so they last forever. With smaller diameter sprockets less torque is required to drive the chains, giving more drive power for tough bales. Designed so it is impossible for the chain to jump off the sprockets, this saves you downtime in the field. Fully enclosed front and rear bale reduces feed falling out whilst travelling and an optional fence can be added to each end, should feede want to feed loose silage or fodder beet.

The bale is held securely in the chamber on the steepest of terrain. To pull the bale against — makes loading with a front loader easier and the bale is held securely in the chamber on even the steepest of terrain.

The drive coupling is protected to eliminate hay from jamming it when connecting, and the hardened drive connection which has been proven on thousands of machines is built to last. 360x bale feeder free the SLX to feed bales out to the left or right and gives precise control of the feed rate. The SLX can be connected reeder either end, which allows you to swap sides should you have a tight 360x bale feeder free and want to feed on a particular side of your barn.

See 360x bale feeder free new model. Toughest chain and floor bars on the market, is bullet-proof and lasts the entire life span of the feeder. Super strong roller chains with the combined strength of 24,lbs, with tough 40mm x 40mm zinc-plated bars. Bars are bolted to the chain, a stronger and more easily replaceable system. Tough new Thermoform fully enclosed polyethylene floor feeded covered drive shafts which eliminate wrapping. Fully enclosed — no wastage of expensive feed. Low maintenance.

Flexible design — do fdeder operate in barns, outdoors, on steep country, with a tele-loader, supplement with loose silage or fodder beet? With the flexible configuration of the SLX round bale unroller, your new feeder will suit all of the above. No other feeder allows this level of flexibility which gives you peace of mind, 360x bale feeder free you want 360x bale feeder free change the way you operate.

Strongest Bars Floor bars are times stronger torsionally than angle type bars of the same size. Loader Mounts The headstock design allows for optional loader mounts to be bolted direct to the frame, allowing the feeder to be operated on a loader or telehandler. Added Versatility Add an extra fence to the options and you can feed loose silage, maize, fodder beet, etc, loaded with the bucket нажмите сюда your front loader and connect-n-feed from either end of the cradle.

Sideshift The bolt on lower hitch mounts allows for the feeder to be off-set by mm in either direction, another unique feature that allows operators to distribute the feed closer to the head-bails and stock in barns eliminating double handling of the feed saving your time. Toughest Chain Toughest chain on the market. Thermoform Floor 360x bale feeder free 360c single piece fully enclosed floor reduces feed waste and will never corrode.

Ultra-low Cradle Our ultra-low cradle design with removable fences makes for easy loading should you not have much lift height on your tractors hitch, and lets you customise the feeder to your preferences. Chain Tensioners Are built into the design, should you ever need to adjust the pre-set chain tension.

Dual Latches High mounted connection latches on both sides of the feeder take the load off the cradle, which removes any load 360x bale feeder free the bale spears. Covered Drive Bearings Bearings outlast bushes, require less grease and self-align to the shafts. Enclosed Sprockets Our 6 tooth sprockets are made from Bisalloy the same material used in a bulldozer посмотреть больше so they last forever. Bale Chamber Fully enclosed front and rear bale reduces feed falling out whilst travelling and an optional fence can frfe added to each end, should you want to feed loose silage or fodder fewder.

Large Rear Fence To pull the bale against — makes loading with a front loader easier and the bale is held securely in the chamber on even the steepest of terrain.

Protected Drive The drive coupling is protected to eliminate hay from jamming it when connecting, and the hardened drive connection which has been fesder on thousands of machines is built to last.

Single Level Control Enables the SLX to feed bales out to the left or right and gives precise control of the feed rate. Get your Hustler See the new model. Solicite ahora.